Turbine Flowmeter

Turbine Flow MeterStainless Steel Flow Meter
PVC Flow Meter
Water MeterFEATURES
• One moving part
• Low friction jewel bearings
• Field repairable without removal from the line
• Choice of materials for chemical compatibility

• Variety of displays and control
APPLICATIONS
• Water treatment
• Wastewater treatment
• Cooling water monitoring
• Industrial fluid control
GENERAL INFORMATION
This unique system of 2″ to 8″ turbine flow meters uses just one moving part, a precision helical rotor. Rotation of the rotor is electronically detected and processed. The high-quality jewel bearings and polished zirconia ceramic shafts minimize friction while providing long wear life in non-lubricating fluids. The entire rotor assembly can be easily removed for field service without removing the meter from the pipe.

WTP bodies are fabricated from Schedule 80 PVC fittings, WTC bodies from carbon steel tubing, and WTS bodies (available as special order) from stainless steel tubing. The turbine insert on WTC and WTS meters is machined from a stainless steel casting. The WTP turbine insert is machined from a solid piece of PVC (polypro in 2” size). Turbine rotors on all models are Kynar (PVDF).

WT flow meters can be ordered with various output options. The basic model (100) comes with pulse output only. An electronic display (Seametrics FT420) is mounted on the 101 model to display flow rate and total (resettable or non-resettable), and provide a programmable pulse or 4-20 mA output. Other electronics options include a blind 4-20 mA transmitter (AO55) on the 102 model and a battery-powered (FT415) rate/totalizer plus pulse output for applications that lack power (104 model). All of these controls/displays can be mounted on the meter or remotely mounted on a wall or panel up to 2,000 feet away. WTSeries flow meters are compatible for use with most other remote-mount Seametrics displays and controls as well.

Turbine Flow Meter Model :
1. WTS Turbine Flow Meter (  Stainless Steel Turbine Flow Meter )

• Stainless-steel body turbine flow meter
• In-line, individually-calibrated turbine meter maximizes accuracy
• Turbine rotor is the only moving part, optimizing low-flow performance
• Solid-state pickup
• Electronic register can be meter-mounted or remote
• Available with blind pulse or 4-20 mA output
• Lightweight, corrosion-resistant 304SS (or optional 316SS) body
• Flanges standard 3″ and above (2″ has female NPT threads)

2. WTP Turbine Flow Meter ( PVC Turbine Flow Meter )

• PVC-body turbine flow meter
• In-line, individually-calibrated turbine flow meter maximizes accuracy
• Turbine rotor is the only moving part, optimizing low-flow performance
• Solid-state pickup
• Electronic register can be meter-mounted or remote
• Available with blind pulse or 4-20 mA output
• Materials are chemical-resistant
• Can be ordered with stub ends (standard) or flanges (optional)

3.  WTC Turbine Flow Meter ( Carbon Steel Turbine Flow Meter )

• In-line, individually-calibrated turbine flow meter maximizes accuracy
• Turbine rotor is the only moving part, optimizing low-flow performance
• Solid-state pickup
• Electronic register can be meter-mounted or remote
• Available with blind pulse or 4-20 mA output
• Heavy-duty, fabricated steel body with shopcoat
• Flanges standard 3″ and above (2″ has female NPT threads)
• 
  

iMAG-SERIES Flanged Magmeter

iMAG-SERIES Flanged Magmeter

 

Kategori:Seametrics Flow Meters

Deskripsi:

GENERAL INFORMATION

The iMAG-Series is the most economical flanged electromagnetic flowmeter on the market. It is used in 3” to 12”

pipe in municipal or industrial water, wastewater, pump stations and packaged plant applications. The iMAG has no moving parts and electrodes are designed to discourage fouling. This magmeter requires no maintenance in applications where debris would impede mechanical meters. There are no parts to wear out. Minimal straight pipe requirements allow iMAG-Series meters to be used in piping configurations where there is little space between the meter and an elbow.

iMAG-Series meters are rated IP68 for applications where the meter may be under water up to a depth of 10 feet (3 meters)

for prolonged periods of time. Rate and total indication are standard. Rate and total units and pulse output are settable via the front panel touch key pad by

the user. The iMAG can be externally powered with 9-36 Vdc at 30 mA. The standard 20-foot (6 meter) cable also provides outputs for use with a variety of Seametrics and other displays and controls for remote reading, data logging and telemetry applications. 4-20mA passive current loop and high frequency outputs are optional. The iMAG 3600 remote display meter can be supplied with an optional internal AC power supply.

FEATURES

• Easy setup

• Minimal straight pipe

• Mounted or remote rate & total

• Tamper-evident seal

• NSF-61 approved

• IP68 rated

THE RIGHT METER FOR

• Water & wastewater

• Municipal

• Treatment plants

• Pump stations

• Packaged plants

• Filtration systems

SPECIFICATIONS

Pipe Size							3”,4”, 6”, 8”, 10”,12”
Flanges							150 lb. ANSI pattern
Pressur							150 psi (10.3 bar) working pressur
Temperature					Operating		10˚ to 130˚ F (-12˚ to 54˚ C)
					Storage		-40˚ to 158˚ F (-40˚ to 70˚ C)
Accuracy							+/- 1% of reading +/- 0.25% of full-scale flow from low flow cutoff to maximum flow rate of 10 m/se
Low Flow Cutof							0.5% of maximum flow rat
Materials		Body (3” Only)					Ductile cast iron, powder-coated w/NSF61 listed epoxy powde
		Body (4”-12”					Welded steel, epoxy-coated
		Liner (3” Only					Noryl®
		Liner (4”-12”)					Santoprene/Polypropylen
		Electronics Housing					Ductile cast iron, powder-coate
		Electrodes					316 stainless stee
		O-ring (3” Only)					EPDM
Display	Type						128x64 dot-matrix LCD
	Digits						5 Digit Rate
	Units						Rate Volume Units	Rate Time Units	Total Volume Units
							Gallons Liters Cubic Feet Cubic Meters Million Gallons Mega Liters Imperial Gallons Million Imperial Gallons	Second Minute Hour Day	Gallons Gallons x 1000 Million Gallons Liters Liters x 1000 Mega Liters Cubic Meters Cubic Meters x 1000 Cubic Feet Cubic Feet x 1000 Imperial Gallons Imperial Gallons x 1000 Million Imperial Gallons
Power		DC Power					9-36 Vdc @ 250 mA max, 30 mA average
		AC Power1					85-264Vac, 50/60Hz, 0.12A
Telemetry Output							3.3V asynchronous receive and transmit (UART) signals, ASCII command-response protocol
Pulse Frequency Output						Signal	Current sinking pulse, isolated, 36 Vdc at 10 mA max
						Pulse Rates	User-settable volume units/pulse. Pulse width is one-half of pulse period, 200 pulses/sec max
Options				4-20mA Current Loop			Isolated, passive, 6-36Vdc, +/- 0.1% of pulse/frequency output HART compliant2
				Digital Output			Isolated, open collector, 36Vdc @ 10mA max., frequency output up to 10kHz
			Relay Output				Solid state relay, normally open, non-polarized, 28Vac/40Vdc @ 0.5A max, 33Hz max
			Serial Communications2				Isolated, asynchronous serial RS485 or RS232, Modbus RTU protocol
Cable			Control Cable				Six-conductor water-blocked cable, polyurethane jacket, 20ft (6m) standard length for power, pulse frequency or optional outputs. Optional lengths up to 100’ available
			Remote Display Cable (iMAG 3600)				33ft (10m) standard length may be shortened (by user in the field). Additional cable can be ordered and attached with the use of a junction box (purchased from a standard supplier) up to 100ft (30m) total
Conductivity							>20 microSiemens/cm
Empty Pipe Detection							Hardware/software, conductivity-based
Regulatory							(EN 61326) pending, NSF-61
Environmental							IP68 to 10ft (3m) depth

DL76 Data Logger

DL76 Data Logger

Kategori:Seametrics Flow Meters

Deskripsi:

GENERAL INFORMATION

The DL76 is a battery-powered data logger that can be used with any Seametrics flowmeter. It stores pulses for up to 3 years, depending on the user-selected frequency of reading. Indicator lights on the unit flash to indicate when it is functioning and when the battery is low. The DL76 can be factory-mounted on the meter or remotely mounted. Housings are rugged cast aluminum, gasketed for environmental protection. When a DL76 logger is placed into operation, it is easily set up using a laptop computer. Data is also retrieved from the DL76 by means of a laptop and can be analyzed on the laptop or easily loaded on a desktop computer for analysis.

*FlowInspector version 2 software (ordered separately) is required for the downloading, storing, viewing, graphing, charting and printing of data in several formats. FlowInspector requires a PC with Windows 98, NT, 2000, XP, Vista or Windows 7; CD-Rom drive; 800 x 600 screen resolution; serial port or USB/serial adapter; and a Seametrics DC3 data cable. FlowInspector can be used with an unlimited number of dataloggers.

FEATURES

• Easy to set-up, easy to use

• Weeks/months/years of data storage

• User-selected sampling interval

• Data retrieval with laptop computer

• Single data retrieval device serves multiple data loggers

APPLICATIONS

• Water usage monitoring, reporting, and management

• Custody transfer regulation

• Peak demand monitoring

SPECIFICATIONS

Power	Size C 3.6 Vdc lithium battery (included)
Battery Life	Estimated life is 3-5 years depending on usage
Temperature	0˚ to 130˚ F (-18˚ to 54˚C)
Rate Units                                Volume	mL, liter, gallon, Imperial gallon, cubic foot, cubic meter, million gallon
Time	Seconds, minutes, hours, days
Total Units	Liter, gallon, Imperial gallon, cubic foot, cubic meter, million gallon, acre-foot, acre-inch, megaliter, thousand-gallon
Data Storage Capacity	Capacity                     at         Sampling Interval
	11 days                       at               15 seconds
	22 days                       at               30 seconds
	44 days                       at                60 seconds
	6 months                     at               240 seconds
	1 year                           at                480 seconds
	3 years                         at               1450 seconds
Maximum Input Frequency	500 Hz
Indicators	Low battery; Power
Memory Wraparound	Selectable options (Stop or Overwrite)
Clock Accuracy	10 minutes/month (.02%)